Welcome, Guest.

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - KittoniuM

226
Media / [Important] [Important] Expect a WAITING period
« on: December 30, 2018, 01:03:41 am »
After you post your videos, expect them to be rewarded in a few weeks, not instantly.

Please don't remove your videos before or after getting credits, even if they suck.

227
Hardware / Re: My Computer(s)
« on: December 23, 2018, 08:19:21 pm »
looks nie but i would do 1 stick of 8gb ram incase yoy want to upgrade to 16gb or 32gb later on

228
Programmers / [Reversing] [Reversing] Finding Entitylist in Just Cause 1
« on: December 16, 2018, 10:45:09 pm »
Here is how i found entity list in JC1


first.. i started looking at strings...

i found something interesting:
"MaxNofChars(%d)met, chars:%d\n"

so i looked at it, and found out that its calling a few things with (0) as nullptr,which means that it's getting the address in Text View but psuedocode messes up and shows 0.

i looked at them in reclass, sure enough they have pointers that look like they are storage for a list

Code: [Select]
char __thiscall sub_474B50(_BYTE *this)
{
  int v1; // eax
  char result; // al
  int v3; // eax
  int v4; // [esp+0h] [ebp-8h]
  unsigned int v5; // [esp+4h] [ebp-4h]

  v4 = (int)this;
  v5 = CEntityList::CountValidEntities(0);
  if ( v5 <= *(unsigned __int16 *)(v4 + 60) )
  {
    if ( v5 != *(unsigned __int16 *)(v4 + 60) || (unsigned __int8)sub_474CB0(v4) )
    {
      result = 1;
    }
    else
    {
      if ( *(_BYTE *)(v4 + 54) )
      {
        v3 = CEntityList::CountValidEntities(0);
        nullsub_1("MaxNofChars(%d)met, chars:%d\n", *(unsigned __int16 *)(v4 + 60), v3);
      }
      result = 0;
    }
  }
  else
  {
    sub_474CB0(v4);
    if ( *(_BYTE *)(v4 + 54) )
    {
      v1 = CEntityList::CountValidEntities(0);
      nullsub_1("MaxNofChars(%d)met, chars:%d\n", *(unsigned __int16 *)(v4 + 60), v1);
    }
    result = 0;
  }
  return result;
}


This is the function that appears to count the number of valid entities
Code: [Select]
int __thiscall sub_4D3A60(int this)
{
  int *v2; // [esp+4h] [ebp-1Ch]
  int *v3; // [esp+8h] [ebp-18h]
  int v4; // [esp+Ch] [ebp-14h]

  v3 = *(int **)(this + 0x28);
  v2 = *(int **)(this + 0x24);
  v4 = 0;
  while ( v3 != v2 )
  {
    if ( sub_4D3A20(*v2) )
      ++v4;
    ++v2;
  }
  return v4;
}
//For the valid entity check
bool __cdecl sub_4D3A20(int a1)
{
  return (*(_DWORD *)(a1 + 2180) >> 6) & 1 && !sub_597B80((char *)a1);
}

229
News / Re: December 2018
« on: December 14, 2018, 11:13:32 am »
Do you have a changelog?

Would be nice to know the changes and additions

no changelogs
but the previous version came out in august so expect a lot of mini changes.

also esp is fixed, text shouldnt become white

230
News / December 2018
« on: December 13, 2018, 10:05:29 pm »
Merry Christmas



New Vids by The Video Team





December 2018
December 30:
A total of 8 videos have been awarded.
Total given out credits: 1,120
Keep up the good work! Remember, you can always earn credits with videos!

December 20:
Just Cause 1 VIP - Added
* Try opening loader after the game has loaded if its not working

December 14:
Grand Theft Auto 5 VIP - Partially Updated
* Some features are not updated and may be a bit buggy...

December 13:
Garry's Mod VIP - Updated
Garry's Mod Free - Updated
Garry's Mod Free Lite - Updated


231
I was wanting to know if the csgo hack will be usable ever or not


Probably... :)
don't expect it soon, I dont like CSGO.

232
my pc crashes each time i start up the hack and play on gmod for 5 min.
it says something like "windows is fixing this" or "we will have to restart your pc"
anyone know what I can do ???

no? youre the only one who has this problem, or you're lying.

233
Products / Re: Garry's Mod Public Hack
« on: December 07, 2018, 11:18:47 pm »
---------------------------
BigPackets Error - press CTRL+C and Post on Support Forum!!
---------------------------
Failed to find present addres---------------------------
BigPackets Error - press CTRL+C and Post on Support Forum!!
---------------------------
Failed to find present address for overlay. Make sure steam overlay is enabled!

---------------------------
ОК   
---------------------------
s for overlay. Make sure steam overlay is enabled!

---------------------------
ОК   
---------------------------

restart game?

234
Support / Re: problems with bigpackets
« on: December 05, 2018, 12:59:23 am »
[2018-12-05 03:37:41.900]    - Failed to download the sound for C:\test\kitterengine\button.wav from the BP site, this is safe to ignore.
[2018-12-05 03:37:50.117]    - Failed to download the sound for C:\test\kitterengine\check.wav from the BP site, this is safe to ignore.
[2018-12-05 03:37:51.850]    - Failed to download the sound for C:\test\kitterengine\hover.wav from the BP site, this is safe to ignore.
[2018-12-05 03:37:53.148]    - Failed to download the sound for C:\test\kitterengine\press.wav from the BP site, this is safe to ignore.
[2018-12-05 03:37:54.277]    - Failed to download the sound for C:\test\kitterengine\open.wav from the BP site, this is safe to ignore.
[2018-12-05 03:37:55.267]    - Failed to download the sound for C:\test\kitterengine\inrange.wav from the BP site, this is safe to ignore.
[2018-12-05 03:37:56.313]    - Failed to download the sound for C:\test\kitterengine\INTEL_GET.WAV from the BP site, this is safe to ignore.
[2018-12-05 03:37:57.319]    - Failed to download the sound for C:\test\kitterengine\INTEL_GETALL.WAV from the BP site, this is safe to ignore.
[2018-12-05 03:37:58.391]    - Failed to download the sound for C:\test\kitterengine\load_26.wav from the BP site
[2018-12-05 03:37:59.267]    - Failed to download the sound for C:\test\kitterengine\beep.wav from the BP site, THIS MAY CAUSE big problems including crashing and instability if you don't have it
[2018-12-05 03:37:59.585]    - Failed to load translations!!

Antivirus/firewall is blocking bigpackets?
You could try formatting windows with a fresh install.

235
Support / Re: Lots of BP Errors...
« on: November 26, 2018, 08:52:33 am »
These were copied straight from the "Error_All" document apart from hiding the user name and spacing between lines. I cannot run the client, it only comes up with the following errors.


[2018-11-23 12:27:03.098] - Failed to download the sound for C:\Users\---\Desktop\{STEAM}\Gmod\kitterengine\button.wav from the BP site, this is safe to ignore.

[2018-11-23 12:27:04.886] - Failed to download the sound for C:\Users\---\Desktop\{STEAM}\Gmod\kitterengine\check.wav from the BP site, this is safe to ignore.

[2018-11-23 12:27:06.202] - Failed to download the sound for C:\Users\---\Desktop\{STEAM}\Gmod\kitterengine\hover.wav from the BP site, this is safe to ignore.

[2018-11-23 12:27:06.897] - Failed to download the sound for C:\Users\---\Desktop\{STEAM}\Gmod\kitterengine\press.wav from the BP site, this is safe to ignore.

[2018-11-23 12:27:08.327] - Failed to download the sound for C:\Users\---\Desktop\{STEAM}\Gmod\kitterengine\open.wav from the BP site, this is safe to ignore.

[2018-11-23 12:27:14.374] - Failed to download the sound for C:\Users\---\Desktop\{STEAM}\Gmod\kitterengine\inrange.wav from the BP site, this is safe to ignore.

[2018-11-23 12:27:17.577] - Failed to download the sound for C:\Users\---\Desktop\{STEAM}\Gmod\kitterengine\INTEL_GET.WAV from the BP site, this is safe to ignore.

[2018-11-23 12:27:19.133] - Failed to download the sound for C:\Users\---\Desktop\{STEAM}\Gmod\kitterengine\INTEL_GETALL.WAV from the BP site, this is safe to ignore.

[2018-11-23 12:27:20.883] - Failed to download the sound for C:\Users\---\Desktop\{STEAM}\Gmod\kitterengine\beep.wav from the BP site, THIS MAY CAUSE big problems including crashing and instability if you don't have it.

[2018-11-23 12:27:21.953] - Failed to load translations!!



Put the loader in just C:/ and try again.

236
Discussion / Re: If i use this hack will i get caught? Gmod darkrp
« on: November 26, 2018, 01:21:32 am »
He's talking about screengrab. Its anti screengrab so if admin screengrabs you they will not see your screen, they will only see black. I've tested it myself.

Wrong.

Admins see a normal screen.
Quit spreading BS

237
Garrys Mod / Re: [Question] How do the credits work?
« on: November 26, 2018, 01:21:05 am »
For example, say I buy credits for the Gmod hack, how do I use them to get FULL access to the hack? Do I use them on the launcher or what?

-How do I use the credits to get full access to the Gmod hack?
-Once I do buy full access to the Gmod back, will I have to rebuy it everytime I hop on? Or is it a one time purchase with credits?


X credits (told in launcher) per 24 hours.

238
Garrys Mod / Re: Gmod doesn't see bigpackets:((
« on: November 17, 2018, 10:45:55 am »
MENU ERROR: lua/menu/mainmenu.lua:227: bad argument #1 to 'Open' (string expected, got nil)
   [C]:-1 [Open]
   lua/menu/mainmenu.lua:227 []
what to do?


LOL!!!!

BIGPACKETS ISNT LUA

239
Support / Re: Synergy cheat problem
« on: November 14, 2018, 10:02:15 pm »
So last time I used the Synergy Cheat, I had troubles getting it to inject. has this been fixed?

check the date in the loader.. if its the same as what it was before.. then no...
but i did test it earlier and it worked for me

240
Products / Re: How to past FREE to PUBLIC?
« on: November 12, 2018, 02:29:38 pm »
Hello !


How can I get the public license for Garry's mod?   Thanks !         

maybe you'll figure it out once you learn how to read :D



Total Members


  • Youtube Youtube
  • Facebook Facebook
  • Twitter Twitter
  • Steam Steam

  • Powered by SMF | SMF © 2018, Simple Machines

    2018 BigPackets. All rights reserved. All other trademarks, logos and copyrights are the property of their respective owners. This site is not associated with any company in any way.